This glass-topped basswood drawer originally was designed for Odonata envelope storage. It is 1-1/2″ (38mm) deeper than the Cornell system equivalent, allowing envelopes to be stored on edge in three rows front to back. The drawer is also ideal for specimens or collectibles that are too tall for other drawers. It features the same one-piece construction technique used in other BioQuip drawers for tight fit of top to bottom sections of the drawer frame, and is spray finished with sealer and clear acrylic gloss. A combination cardholder/drawer pull is provided.
Dimensions & Weight:
19 x 16-1/2 x 4-1/2″ O.D. (48.3 x 42 x 11.4cm)
17-3/4 x 15-1/4″ I.D. (45 x 39cm)
4″ (10.1cm) I.D. height, hardboard bottom, or
3-11/16″ (9.3cm) I.D. height with foam pinning bottom
Weight: 6.2 lb.
Custom designed 1025OD unit trays facilitate organization and storage of Odonata specimens in envelopes. A single tray is easily removed from a drawer for working with a specific group of specimens. Each single tray will hold approximately 50 specimens, depending on size. The tray is also convenient when this storage system is used to house collectibles. Trays are made from heavy duty .05″ chipboard covered with white glazed paper. Drawer capacity is 9 trays. Dimensions are 5-7/8 x 5 x 2″ high. Note: this tray does not have foam pinning bottom.
See also #2508FWL and #2517FWL for Odonata or collectibles storage cabinets, #1130DP for Odonata envelopes, and #1130S for envelope heat sealer.