Programmable Timer, 12 VDC Input, 6 or 12 VDC Output
Timer can be programmed for up to 16 non-overlapping, on/off functions over a 7-day period. A small built-in solar charger continually recharges the on-board lithium battery that powers the clock, and has a life of 10 years. An easy to read LCD screen, ½ x 1-1/2” (13 x 38 mm) can run traps up to 1600 watts. A 12 volt power source is required to operate the timer, please see #2861 Battery Pack as a good option.
The timer is enclosed in an ABS plastic box, 5-1/4 x 3 x 2” (133 x 76 x 51 mm), and has a rubber booted toggle switch to change from 6 to 12 volts. A 9ft (2.7m) 18-gauge power cord is equipped with a male banana plug and 3ft (.9 m) output cord with female receptacle.
For users working is wet environments the clock, though water resistant, is not waterproof. The window for the solar charger and LCD screen are not sealed. Gently applying a piece of clear tape or plastic bag over the timer can help prevent the entry of water into the timer, should the user decide additional protection is required.
Please note, BioQuip does not guarantee this item against water related damage.
Alligator clip adapter 2835AC is for use with all EVS traps. Spade tip adapter 2835AS is for use with all CDC style traps. These are not included with the timer and must be purchased separately.
Operating instructions for the timer can be found by clicking the blue info button below.
|Thumbnail||Catalog #||Options||Price||Quantity||Quantity Pricing|
|2835AS||Female Spade Tip Adapter||$13.81|
|2835AC||Alligator Clip Adapter||$15.59|
Have a question?
You must be logged in to post a question.