A longer 18″ (46cm) length is available in 1022 series pinning boards, except for the 1022E adjustable board at 14″ (36cm). The 3/8″ (.95cm) rigid plastazote pinning strip holds a pin securely. Sufficient clearance permits mounting the insect at the top third of pin. Basswood mounting surfaces are angled at 165°. A 1/8″ (.32cm) hardboard floor is provided to prevent accidental disturbance of pinned insects from the bottom.
For large specimens, use the 1022W adjustable board. It has flat pinning surfaces and two stabilizing adjustment screws on each end.